Airport Extreme Router Setup for Smart DNS Proxy
Poniższa instrukcja konfiguracji jest potrzebna tylko raz. Po zakończeniu wstępnej konfiguracji nie będzie konieczne wykonywanie tych samych kroków w dowolnym momencie. Twoje połączenie będzie działać automatycznie *w każdej chwili!
WAŻNE: Jeśli Twoje lotnisko Extreme lub Time Capsule znajduje się w trybie "Bridge Mode", musisz zmienić DNS na routerze, z którym to lotnisko jest połączone.
1. Open Airport Admin Utility.
2. Click on Internet Icon on the top selections.
3. Fill in DNS Server fields with the following Smart DNS Proxy IPs in LEFT ana RIGHT DNS sections.
The list of IP addresses of our DNS severs can be found on our DNS Server List here: https://www.smartdnsproxy.com/Servers. Use the closest DNS servers to your physical location. Select the closest server to your physical location as Primary. Then select the 2nd closest server to your physical location as Secondary server.
i kliknij na przycisk "Aktualizuj".
Attention
Make sure to RESTART your Router!
* Remember whenever your PC/Router IP changes, our service will stop working for you. You will need to LOG INTO Smart DNS Proxy and UPDATE your IP address so that our system could check your IP address and add your new IP to our database. Then, you will be able to continue using our service. If this is the first time you set up, we also suggest that you log in with your PC to our site from the same Wired/Wireless network to show our system your IP address.